AGV

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

 

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

 

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

 

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

Concentration, strength and talent: The Spanish champion showed off all his qualities on the track in one of the most singular and hard-fought seasons in the history of the World Championship. And in his second appearance in the premier class, after winning the Moto3 world championship in 2017, he earned the title of MotoGP™ World Champion.

The PISTA GP RR MIR WORLD CHAMPION 2020 is the official replica of the helmet Joan wore on the lap of honor of the Valencian Community Grand Prix, which set the seal on his first MotoGP™ world title. There are fine details and the number 1 at the center of it all, for a champion with signature calm and control at each victory.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance.

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance.

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

LIMITED EDITION

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

 

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

 

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved