Off Road

Designed primarily for ATV use in muddy riding conditions, the EBC SV Series brake pads are a high density version of our successful 'R Series' pad. Being higher in density these pads last longer than anything else in the EBC family and will stand up against any pad you can buy. They are also very low in rotor abrasion and will not damage your brake rotor. High density sintered copper alloy for the longest possible life in utility applications on ATV, especially in wet, mud, dust and dirt conditions. You won’t find a longer lasting utility pad!

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

Our BF307+ high performance Super DOT 4 brake fluid has been specially formulated to provide outstanding performance for braking systems routinely operated at extreme temperatures making this fluid ideal for fast street use, track days and racing. Do not mix BF307+ brake fluid with other brake fluids or its high performance may be compromised.

Typical dry boiling point – 310°C (590°F). Typical wet boiling point – 204°C (399°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

EBC DOT 5 silicone brake fluid is a very high specification fluid based on polydimethylsiloxanes (silicones) and offers many advantages over conventional glycol based fluids. Silicone fluid does not absorb water from the surrounding atmosphere while in service and therefore offers greatly extended service life whilst improving corrosion resistance of the main components of the braking system.

Recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which non-petroleum based fluid is specified. Particularly recommended for classic cars or vehicles that are garaged for much of their life but must be usable at short notice.

This fluid must only ever be mixed with DOT 5 fluid which has the same silicone base. Never mix DOT 5 with regular glycol based fluids.

Typical dry boiling point – 300°C (572°F). Typical wet boiling point – 180°C (356°F)

EBC DOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid is ideally suited for higher performance vehicles where the braking system routinely reaches moderate brake temperatures.

Typical dry boiling point – 270°C (518°F). Typical wet boiling point – 170°C (338°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

Brake Shoes by EBC. EBC Brakes standard motorcycle replacement brake shoes are an OE quality replacement brake shoe made with boned brake linings and using high pressure die cast aluminium platforms for two wheeled machines. Shoes are edge trimmed and radius ground exactly into the brake drum. They have chamfers on the ends of the lining and come complete with OE style brake shoe springs.

Features:

• Expertly crafted from the highest grade materials
• Will deliver years of reliable service
• Made to withstand the harshest conditions

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

R Series Heavy Duty Sintered Brake Pads by EBC. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Features:

• Highest durability ATV grade
• Target user is Off-Road ATV rider in mud, wet, sand or dust riding
• Made in the EBC Brakes USA factory
• Expertly crafted from the highest grade materials
• Will deliver years of reliable service
• Made to withstand the harshest conditions

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

The cool running EBC Carbon TT brake pads are designed for use in motocross, enduro and ATV applications. While the life cycle is not as good as a sintered copper pad, Carbon TT brake pads generate less heat which is a major benefit in fast, dry conditions when riding off road. The EBC Carbon TT compound prevents the transfer of heat to the hydraulics. The backing plate of these pads are painted a distinctive red.  

Please be aware that when used on rear rotors, particularly in ATV use, wear life of these pads may be less than the sintered pads that are installed as OE. This pad has ECE R90 type approval for many off road bikes in Europe indicating it is safe for road use due to its effectiveness when hot.

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

Front Circular profile

• Front or Rear fitments.
• New Lightweight construction.
• Radical new profile.
• Heat treated carbon steel.
• Gold zinc anodised.

Front Contoured profile

Now available for most popular Moto-X machines, EBC’s new Supercross Contour discs have proved not only to provide a trick looking brake setup, but also deliver great and improved brake feel over conventional solid discs, according to many moto-x riders.

• Extra weight reduction reducing unsprung weight.
• Super trick looking contoured profile.
• Made from heat treated carbon steel with higher friction than stainless steel equals more stopping power.
• Lustre finish gold anodised to prevent corrosion.

EBC Heavy Duty Heat Treated MX Rear & ATV Front and Rear Brake Discs

• Strong heavy duty design.
• Heat treated carbon steel.
• Gold zinc anodised.
 

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

MX-S Off-Road Race Sintered Brake Pads by EBC. EBC MX-S series brake pads are motocross brake pads made in the EBC USA plant with long lasting sintered copper alloy with a diamond gound surface finish often including new slider pin kits. Perfect for off-road race and sport use, motocross brake pads with a difference.

Features:

• For Race Use Only
• Not TÜV tested or ECE R 90 street legal

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

Water grooved EBC aluminium series brake shoes are made using high pressure Die cast alluminium platforms with bonded brake linings. All shoes are radius ground and edge trimmed and also feature lead in and lead out chamfers at lining ends and original equipment style brake shoe springs. The multiple angled liner grooves are designed to channel away dirt, dust,water and debris from the braking area to improve braking and extend shoe and drum life.

Features:

• Expertly crafted from the highest grade materials
• Will deliver years of reliable service
• Made to withstand the harshest conditions

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

Coil springs
These are spiral wound springs using 4- 8 pieces per set made from heat treated high carbon steel and come in various shapes and sizes delivering differing spring tensions depending on the size of the bike and the horsepower of your engine. It is important to note that you cannot change the basic shape of these springs to gain any performance advantage but what you can do is buy a EBC Brakes CSK kit which have slightly thicker winding material and deliver 10-15% more clamp pressure.


Diaphragm Springs
These are a dish shaped flat steel pressure ring and there are normally only 1 or 2 in a bikes engine, you should never add more springs on a diaphragm spring set up. If you do wish to upgrade the clamp load and your bikes is fitted with a diaphragm spring clutch kit buy an EBC Brakes spring kit, all of which are built with 10-15% more clamp pressure than stock.

Find the correct fitment for your motorcycle here: EBC Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

EBC DRC Dirt Racer clutch sets are a complete set of CK series heavy duty cork based lined plates plus heavy duty clutch springs and steel separator plates.

Many off road machines are fitted from new with alloy separator plates which wear out quickly and cause clutch to slip. The steel units in the EBC DRC kit prevent this and re-establish original clutch stack height.

Find the correct fitment for your motorcycle here: EBC Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

EBC Standard CK Series clutch kits for both street and dirt applications. Almost identical to original equipment clutch plates, the CK series are a cork based product impregnated with aluminum particles to increase wear life and heat resistance. Material is highly compressed to avoid swell and clutch drag and is an ideal general purpose replacement material for all grades and sizes of motorcycle. Kit includes a complete “engine set” of friction plates only.

Find the correct fitment for your motorcycle here: EBC Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

Upgrade your stopping power with the latest EBC oversize supermoto rotor kits. Using your standard caliper, the bracket provided repositions the caliper at a larger radius to enhance braking power and feel over standard rotor size. The easy to install kit takes minutes to fit and gives a significant brake improvement.
 

Motocross:

280mm oversize design or 250mm oversize design for 80/85cc MX Bikes.

• Fully floating construction.
• Heat treated carbon steel.
• Complete with brackets.
• Front applications only.

Supermoto:

320mm oversize Supermoto disc constructed with forged alloy centre hub for weight reduction and tough billet steel 4mm thickness brake rotor for maximum stopping power. The rotor rings include OD cooling groove and extra weight reducing scraper holes and are riveted together with a nine button sturdy rivet system.

The rotor kit comes complete with anodised alloy relocation brackets for most popular MX/enduro bikes and are supplied as a kit with the complete rotor unit and anodised bracket. The brake hose may need to be replaced with a longer version.
 

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)