Off Road

BSLi-01 battery is a part of our LiFePO4 range. Designed for the most demanding riders, this 12.8V 2Ah (24Wh) battery offers maximum starting performance, further safety and higher cycle life. With its ultra-lightweight design, this BSLi-01 battery provides faster acceleration to all powersport vehicles.

Useful, this battery is equipped with a voltage indicator to check the state of charge at any time.

Replacement Conversion from BS Batteriers SLA:

BB3L-A/B

Specifications:

• Technology: LiFePO4
• Voltage (V): 12.8
• Capacity 10hr (Ah): 2
• Power (Wh): 24
• CCA (A): 140
• Polartiy:
• Terminal:
• Dimensions (mm): 92 x 52 x 90

FEATURES

• Ready to use
• Lighter weight – up to 70% than lead acid batteries
• Multi-positioning mounting – up to 180°
• Extensive cycle life – over 2000 cycles
• Fast charging
• Very safe and environmental friendly
• Very low self discharge
• Can start engines after a long period of storage
• Robust brass terminals
• Heat temperature resistance up to 230 °C
• Waterproof design

UPGRADE FROM:

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

BSLi-02 battery is a part of our LiFePO4 range. Designed for the most demanding riders, this 12.8V 2Ah (24Wh) battery offers maximum starting performance, further safety and higher cycle life. With its ultra-lightweight design, this BSLi-02 battery provides faster acceleration to all powersport vehicles.

Useful, this battery is equipped with a voltage indicator to check the state of charge at any time.

Replacement Conversion from BS Batteriers SLA:

12N5.5-3B, BB4L-B, BB5L-B, BB7C-A, BB7L-B2, BTX4L+ / BTZ5S, BTX5L / BTZ6S, BTX7L, BTZ7V, BTZ8V

Specifications:

• Technology: LiFePO4
• Voltage (V): 12.8
• Capacity 10hr (Ah): 2
• Power (Wh): 24
• CCA (A): 140
• Polartiy:
• Terminal:
• Dimensions (mm): 107 x 56 x 85

FEATURES

• Ready to use
• Lighter weight – up to 70% than lead acid batteries
• Multi-positioning mounting – up to 180°
• Extensive cycle life – over 2000 cycles
• Fast charging
• Very safe and environmental friendly
• Very low self discharge
• Can start engines after a long period of storage
• Robust brass terminals
• Heat temperature resistance up to 230 °C
• Waterproof design

UPGRADE FROM:

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

BSLi-10 battery is a part of our LiFePO4 range. Designed for the most demanding riders, this 12.8V 6Ah (90Wh) battery offers maximum starting performance, further safety and higher cycle life. With its ultra-lightweight design, this BSLi-10 battery provides faster acceleration to all powersport vehicles.

Useful, this battery is equipped with a voltage indicator to check the state of charge at any time.

Replacement Conversion from BS Batteriers SLA:

BTX20L, BTX20HL, BTX24HL, SLA12-19, BTX20L-BS, BTX20HL-BS, BTX24HL-BS, SLA12-19-BS, B50-N18L-A/A2/A3, 51913, 51814

Specifications:

• Technology: LiFePO4
• Voltage (V): 12.8
• Capacity 10hr (Ah): 6
• Power (Wh): 72
• CCA (A): 360
• Polartiy:
• Terminal:
• Dimensions (mm): 148 x 86 x 105

FEATURES

• Ready to use
• Lighter weight – up to 70% than lead acid batteries
• Multi-positioning mounting – up to 180°
• Extensive cycle life – over 2000 cycles
• Fast charging
• Very safe and environmental friendly
• Very low self discharge
• Can start engines after a long period of storage
• Robust brass terminals
• Heat temperature resistance up to 230 °C
• Waterproof design
• Spacers to adjust the dimensions if necessary, to make sure new battery can be installed firmly in the battery box

UPGRADE FROM:

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

BSLi-04/06 battery is a part of our LiFePO4 range. Designed for the most demanding riders, this 12.8V 4Ah (48Wh) battery offers maximum starting performance, further safety and higher cycle life. With its ultra-lightweight design, this BSLi-04/06 battery provides faster acceleration to all powersport vehicles.

Useful, this battery is equipped with a voltage indicator to check the state of charge at any time.

Replacement Conversion from BS Batteriers SLA:

BTZ10S, BTZ12S, BTZ14S, BTX12, BTX14, BTX14AH / BB14-A2/B2, BT12B-4, BT14B-4, BT12A, BB12A-A2, BB14A-A2

Specifications:

• Technology: LiFePO4
• Voltage (V): 12.8
• Capacity 10hr (Ah): 4
• Power (Wh): 48
• CCA (A): 280
• Polartiy:
• Terminal:
• Dimensions (mm): 134 x 65 x 92

FEATURES

• Ready to use
• Lighter weight – up to 70% than lead acid batteries
• Multi-positioning mounting – up to 180°
• Extensive cycle life – over 2000 cycles
• Fast charging
• Very safe and environmental friendly
• Very low self discharge
• Can start engines after a long period of storage
• Robust brass terminals
• Heat temperature resistance up to 230 °C
• Waterproof design
• Spacers to adjust the dimensions if necessary, to make sure new battery can be installed firmly in the battery box

UPGRADE FROM:

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

U1R-9 battery is a part of our SLA range. Designed to make the user life easier, this 12V 28Ah battery is ready to use, 100% maintenance free and completely spill proof.

Extremely simple to install & carry, this U1R-9 battery offers increased power, extended life and maximum reliability to all powersport & garden vehicles that require high performance.

Specifications:

• Technology: SLA
• Voltage (V): 12
• Capacity 20hr (Ah): 28
• CCA (A): 300
• Polartiy:
• Terminal:
• Dimensions (mm): 195 x 125 x 176

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

U1-9 battery is a part of our SLA range. Designed to make the user life easier, this 12V 28Ah battery is ready to use, 100% maintenance free and completely spill proof.

Extremely simple to install & carry, this U1-9 battery offers increased power, extended life and maximum reliability to all powersport & garden vehicles that require high performance.

Specifications:

• Technology: SLA
• Voltage (V): 12
• Capacity 20hr (Ah): 28
• CCA (A): 300
• Polartiy:
• Terminal:
• Dimensions (mm): 195 x 125 x 176

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

BTX14 battery is a part of our SLA range. Designed to make the user life easier, this 12V 12.6Ah battery is ready to use, 100% maintenance free and completely spill proof.

Extremely simple to install & carry, this BTX14 battery offers increased power, extended life and maximum reliability to all powersport vehicles that require high performance.

Cross Reference:

• Yuasa / Top Lite / Katana: YTX14-BS
• Motobatt: MBTX12U / MBYZ16H
• Powerroad: YG14-BS
• USPS: USX14-BS

Specifications:

• Technology: SLA
• Voltage (V): 12
• Capacity 10hr (Ah): 12
• Capacity 20hr (Ah): 12.6
• CCA (A): 200
• Polartiy:
• Terminal:
• Dimensions (mm): 150 x 87 x 145

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

The BT02 is a battery & alternator tester designed to save time on electrical issues, it gives a instant diagnosis.

With all the features inside an automatic, you cannot use it wrong.

FEATURES

• For 12V battery
• Test the condition of your battery and alternator
• Connect the crocodile clip to battery terminal and check alternator or battery
• Easy to use

INSTRUCTIONS

1. Connect the red crocodile clip to the positive (+) battery terminal
2. Connect the black crocodile clip to the negative (-) battery terminal

Battery Check

• Switch on the vehicle lights for 1-2 minutes
• Disconnect the battery from the vehicle
• Wait 10 minutes
• Connect the tester

Alternator Check

• Run the vehicle with all electrical equipment off (lights, radio...)
• Run the vehicle with all electrical equipment on (lights, radio...)
• The green LED should light on both tests meaning the alternator is GOOD
• A red LED indicates the alternator is over charging : must be controlled
• No LED light indicates the alternator may not be charging : must be controlled

BSLi battery is a part of our LiFePO4 range. Designed for the most demanding riders, the battery offers maximum starting performance, further safety and higher cycle life.
With its ultra-lightweight design, the battery provides faster acceleration to all powersport vehicles.

Useful, this battery is equipped with a voltage indicator to check the state of charge at any time.

FEATURES

• Ready to use
• Lighter weight – up to 70% than lead acid batteries
• Multi-positioning mounting – up to 180°
• Extensive cycle life – over 2000 cycles
• Fast charging
• Very safe and environmental friendly
• Very low self discharge
• Can start engines after a long period of storage
• Robust brass terminals
• Heat temperature resistance up to 230 °C
• Waterproof design
• Spacers to adjust the dimensions if necessary, to make sure new battery can be installed firmly in the battery box

UPGRADE FROM:

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

Simple and efficient, Toplite’s line of 12 volt 'YuMicron' high performance conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Heat sealed case protects against seepage and corrosion

• Special thin separators provides high cranking power

• Heavy-duty glass mat resists shredding of active material even under severe vibration

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Simple and efficient, Toplite’s line of 12 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YT Series Battery Features:

• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

YTX Series Battery Features:

• Improved CCA over YT Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YTX(H) Series Battery Features:

• H Series – increased power, up to 30% more CCA over YTX Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

TTZ Series Battery Features:

• Ideal for sport bike applications
• High CCA in a compact size
• Lightweight design
• Enhanced capacity recovery
• Expanded grid design for superior reliability
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

BS SLA Factory Activated batteries have all the features of Maintenance Free batteries with the increased power of a radial grid design and additional plates.

These batteries are prefectly suitable for motorcycles, scooters, ATV's, UTV's, watercraft, and lawnmowers.

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide