Road

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Made in Utah, USA by our friends at Voile® these 20” (0.50m) long straps are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Immensely versatile, these personal favorites of ours are perfect for securing gear on any motorcycle in any weather.

Features:

• Usable Length Range: 5.1in — 17.1in / 13cm — 43.5cm
• Material: UV-Resistant Polyurethane
• Buckle: Super Tough Nylon
• Non-Marring
• Non-Conductive
• Won't Slip
• Holds Tight
• Super Strong
• UV Resistant
• Works in Extreme Weather
• Daisy Chain Together
• Time-Tested Design
• Comes as 1 single strap

Form & Function:

These Voile Straps® are made of the same tough stretch polyurethane, including the UV-resistant additive that increases their lifespan. Their heavy-duty heat-treated aluminum buckle features a slim profile for packing efficiency and extra durability. These straps are the definitive way to secure your gear, so toss those cheesy bungee cords!

Made in Utah, USA by our friends at Voile® these 32” (0.80m) long straps are 20% thicker and 25% wider, making them the strongest of their kind. Immensely versatile, these personal favorites of ours are perfect for securing gear on any motorcycle in any weather.

Features:

• Usable Length Range: 8.8in — 28.7in / 22.2cm — 72.9cm
• Material: UV-Resistant Polyurethane
• Buckle: Hardened Aluminum
• 20% Thicker
• 25% Wider
• Extra Long
• Won't Slip
• Holds Tight
• Super Strong
• UV Resistant
• Works in Extreme Weather
• Daisy Chain Together
• Time-Tested Design
• Comes as 1 single strap

Form & Function:

These Voile Straps® are made of the same tough stretch polyurethane, including the UV-resistant additive that increases their lifespan. Their heavy-duty heat-treated aluminum buckle features a slim profile for packing efficiency and extra durability. These straps are the definitive way to secure your gear, so toss those cheesy bungee cords!

The RST Roadster boot, it’s styled like a traditional leather lace up work boot.

However as this is a boot that’s designed for riding in too we’ve fitted a double layer leather shift change pad and re-enforcement to the ankle area. The Roadster is the perfect combination with a pair of Aramid jeans for a smart yet practical riding outfit that can be worn all day.

ARMOUR

• CE Certification Rating: CE Certified
• Heel Protection: Reinforced
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Full Grain Cowhide
• Waterproof Lining: Hipora Waterproof Breathable Membrane
• Closure: Laces
• Shift Pad: Yes
• Shank: Polycarbonate Anti Twist Midsole
• Insole: Anti-Bacterial Gel

FEATURES & BENEFITS

• Toe Box: Reinforced

FIT PROFILE

• Urban Casual / Sport / Touring

For the RST 2024 Collection, one of our main priorities was to improve our Hoodie collection – and we’ve done just that.

We’ve developed a new high tenacity outer fabric, using a blend of Cotton, Nylon and Polyester. This blend gives a lightweight, abrasion resistant and high strength outer layer that only requires extra aramid fibre protection in zone 1.

Additionally, the enhanced RST Team CE Mens Textile Hoodie has been built with our new lightweight RST Airflow Armour.

Other added features include, MAX zips which offer a secure and reliable closure system, the drawstring hood which can reduce any billowing whilst riding.

ARMOUR

• CE Certification Rating: A
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Cotton & Nylon
• Product Lining: Polyester
• Zips: Max Zips
• Connection Zip: No

FEATURES & BENEFITS

• Adjustment: Drawstring Hood
• Outer Pockets: 2 (Zipped)
• Thumb Loops
• Holographic Logos

The Brushed Men’s shirt utilises a unique exterior fabric mixed with wool to give the outstanding abrasion tear and burst strength, meeting the requirements of CE without any reinforcement lining on the inside. Giving a versatile product that’s both comfortable and stylish.

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Brushed Wool
• Product Lining: Fixed Mesh
• Connection Zip: No

FEATURES AND BENEFITS

• Inner Pockets: 1
• Outer Pockets: 2
• Cuff Adjusters
• RST Branded Press Studs

The RST Reinforced Lumberjack style shirt is CE Certified to Level A. The shirt come with a pocket for a back protector to be added, two outer front pockets, a button down closure which cleverly conceals a zip closure on the inside for added security so that you know that in the event of a crash your shirt won't be popping open. The armour in the shoulders and elbows are both CE Level 1. The jacket is made of HTC with a DuPont™ Kevlar® lining.

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Cotton
• Inner Lining: DuPont™ Kevlar®
• Zips: YKK Antique Brass
• Thread: Coates Bonded Nylon - Triple Stitched
• Connection Zip: No

FEATURES AND BENEFITS

• Inner Pockets: 1
• Outer Pockets: 2

The NEW RST x Kevlar® Tech Pro Textile Jean - Black Out Edition

The RST x Kevlar® Tech Pro Textile Jean is one of the most technically advanced riding jeans on the market- it may look casual, but it is packed with protection technology. The RST x Kevlar® Tech Pro Textile Jean has a CE rating of AAA, offering the highest level of protection. Made from heavy duty Cordura® denim, reinforced with Kevlar®, the jeans come with CE Level 2 knee and hip armour. Added to this are the stretch panels in the knee and seat area, along with the triple stitched nylon threading throughout.

ARMOUR

• CE Certification Rating: AAA
• Knee Armour: CE Level 2
• Hip Armour: CE Level 2

CONSTRUCTION

• Main Outer Material: Heavy Duty Cordura Denim
• Inner Lining: Fixed Cotton Lining, Fixed Mesh Lining
• Zips: YKK Zippers

FEATURES & BENEFITS

• Outer Pockets: 5
• Stretch Panels: Knee and Rear
• Infinite Adjust Armour System: Yes
• RST Branded Back Waist Label Patch: Yes
• Belt Loops: Yes
• Contrast Stitch Detail: Yes

FIT PROFILE

• Urban

The RST x Kevlar® Tech Pro Shortleg Textile Jean is one of the most technically advanced riding jeans on the market- it may look casual, but it is packed with protection technology. The RST x Kevlar® Tech Pro Shortleg Textile Jean has a CE rating of AAA, offering the highest level of protection. Made from heavy duty Cordura® denim, reinforced with Kevlar®, the jeans come with CE Level 2 knee and hip armour. Added to this are the stretch panels in the knee and seat area, along with the triple stitched nylon threading throughout.

ARMOUR

• CE Certification Rating: AAA
• Knee Armour: CE Level 2
• Hip Armour: CE Level 2

CONSTRUCTION

• Main Outer Material: Heavy Duty Cordura Denim
• Inner Lining: Fixed Cotton Lining, Fixed Mesh Lining
• Zips: YKK Zippers

FEATURES & BENEFITS

• Outer Pockets: 5
• Stretch Panels: Knee and Rear
• Infinite Adjust Armour System: Yes
• RST Branded Back Waist Label Patch: Yes
• Belt Loops: Yes
• Contrast Stitch Detail: Yes

FIT PROFILE

• Urban

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations. Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand.

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations. Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand.

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations. Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand. This talk less patch is 3.5 in length.

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations. Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand. This one's 2.75 inches wide.

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The original Biltwell Work glove has been a rugged staple in our motorcycle gear line for years. Work 2.0 raises the bar for style and construction with an elasticated cuff, suede cowhide palm protection, and 100% goatskin construction for more comfort and dexterity.

Features:

• 100% goatskin construction
• Suede cow leather palm panels for improved grip and abrasion resistance
• Elasticated wrist closure on full wraparound cuffs
• Super durable polyester thread throughout
• Wrist cuff features suede pull with embroidered logo detailing
• Quilted expansion panels on index and middle finger joints for added dexterity
• Innovative palm, thumb and finger construction puts seams on the outside—less chafing, more comfort
• Raised welt detailing on back of hand
• Available in S-XXL sizes
• Black and Gold colorways available

Form & Function:

Known by many names—workers, ropers, truckers—this style of glove gained early popularity among folks who earn a living with their hands. That blue-collar street cred is what made our original Work glove so popular with modern motorcyclers. Less flash, more function and comfort. Work Glove 2.0 builds on our original model’s strengths by replacing the cowhide with soft, supple goatskin leather. All other design and construction features remain to give you moto-tested comfort and performance.

Our newest 100-percent synthetic glove is built for aggressive off-road riding, but that doesn’t mean you can’t wear it on pavement. You can, and we know a bunch of high-performance street riders who do. 

Features:

• Synthetic suede palm features two-way stretch for a snug, comfortable fit
• Three-ply, one-piece vented polyester back and thumb construction for maximum airflow
• Flexible thermoplastic rubber knuckle guards and shield logo
• Lycra expansion panels in finger joints for added dexterity
• Conductive stitching in fingers and thumb lets you operate smart screens
• Rugged single- and double-needle polyester stitching throughout
• Adjustable wrist wrap with Velcro closure

Form & Function:

By providing a snug fit, our Anza glove reduces the chance of chafing on your palm and fingers. A double-stitched reinforcement panel on the thumb and index finger adds strength to the friction zone between your hands and the grips. Stylish thermoplastic rubber knuckle guards on the back of the glove provide another layer of protection from rocky roost and airborne road debris.

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.