Road

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

This sneaker style boot has a flatter sole which is easier to walk around in.

Made from heavy-duty microfibre and reinforced with a Ballistic fabric, the boot has integrated heel and ankle protection and a rubberised shift pad for enhanced comfort

For added security, the lace and hook & loop closure system also features a lace garage which tidily secures the lace ends away, preventing the lace getting trapped around the bike.

This is a great breathable summer boot!

ARMOUR

• CE Certification Rating: CE Certified
• Heel Protection: Reinforced Cockpit
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Microfibre
• Secondary Material: Ballistic
• Closure: Laces with Hook & Loop Ankle Tab
• Shift Pad: Yes - Rubberised
• Shank: Polycarbonate Anti Twist Midsole
• Insole: Anti-Bacterial Gel
• Outsole: RST Sneaker Sole

FEATURES & BENEFITS

• Toe Box: Integrated & Reinforced
• Puller: Strap Design
• RST Logo: Debossed
• Reflective Detail: Yes - Reflex Logos
• Lace Garage: Yes

FIT PROFILE

• Urban

This is the ultimate moto sneaker. A sneaker for when you are off the bike and a boot for when you are on the bike.

With ankle protection, and integrated toe box, including classic styling, the HiTop is a real multi-functioning boot.

ARMOUR

• CE Certification Rating: CE Certified
• Heel Protection: Integrated
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Suede
• Ventilation: Perforated Toe Box
• Closure: Lace
• Shank: Polycarbonate Anti Twist Midsole
• Sole: Urban

FEATURES & BENEFITS

• Toe Box: Reinforced

FIT PROFILE

• Urban

The Workwear boot is RST’s take on a fashion workwear styled boot engineered for motorcycle riding.

Featuring inbuilt ankle protectors and all the requirements for a motorcycle CE Certified boot.

ARMOUR

• CE Certification Rating: CE Certified

CONSTRUCTION

• Main Outer Material: Leather
• Product Lining: Fixed Mesh Lining

FEATURES & BENEFITS

• Toe Box: Reinforced
• Polycarbonate Anti Twist Shank
• Insole: Antibacterial Gel Insole
• Fastning: Lace astening

FIT PROFILE

• Urban

Retro Design, Security of the Future

The MT Jarama is the first retro helmet approved under the ECE 22.06 standard. And, of course, it already has the DOT homologation.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

RST Airbag Suits now avaiable in New Zealand.

The V4.1 EVO Airbag suit is the elite level race suit from RST, developed for the world’s most extreme racing environments.

Constructed with a 60/40 spilt of the highest quality Kangaroo and Grade A Cowhide, reinforced with Aramid protection and fitted with a full suite of level 2 CE armour, the V4.1 exceeds the highest AAA CE rating. Reverse hook & loop factory knee sliders, elbow sliders and inner knee grippers further enhance the V4.1’s real racing pedigree.

The V4.1 Evo is a more advanced suit than the previous V4.1 as the suit has been upgraded with In&Motion’s new essential airbag system and a removable lining.

ARMOUR

• CE Certification Rating: AAA
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU
• Knee Cup: TPU

CONSTRUCTION

• Main Outer Material: Drum Dyed Kangaroo Leather
• Stretch Material: Keprotech with Leather Motion Panels
• Inner Lining: Removable Comfort Mesh Lining
• Collar: Neoprene Race
• Cuff: Neoprene Race
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Perforated Leather
• Reinforcement: Aramid in Impact Areas

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Race Dept Reverse Velcro Knee Sliders
• Elbow Slider: Standard Elbow Slider
• Superfabric Reinforcement: Yes
• Boot Gripper Tape: Yes

Cut slightly less aggressively than the V4.1, the Pro Series 1-pc suit is fully CE certified to level AAA and is an ideal choice for track days.

Made from super supple premium cowhide leather, the suit is reinforced with seam free, four-way woven stretch with motion panels which stretches from the side of the body to the arms and across the chest, knees, elbows, rear back, inner calf and thigh. This enhances the body length and offers superior levels of comfort and movement on and off the bike. Additionally, the double layer leather on the seat also features a stitched in coccyx protector and the inner section of the knee features Dupont™ Kevlar® to aid grip on the fuel tank under heavy braking.

Additionally, the fixed 3D Quick Dry mesh lining absorbs sweat easily, is fast drying and along with the panel in panel ventilation on the chest, body, inner thighs and back, keeps you fresh.

The race hump has been designed to accommodate helmet spoilers and aids aerodynamic performance in a racing tuck.

Add in-class leading safety features such as the suite of CE certified armour, TPU shoulder and knee cups, quick release hook & loop elbow and knee sliders and you have a high pedigree riding suit that punches way above its weight.

The Pro series Evo is an updated version of the Pro Series Suit as it now has In&Motion’s new essential airbag system and a removable lining.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Back Protector Level 1
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU
• Knee Cup: TPU

CONSTRUCTION

• Main Outer Material: Premium Drum Dyed Cowhide Leather
• Stretch Material: 4 Way Woven Stretch Panels with Full Body Motion Panels
• Inner Lining: Fixed Quick Dry 3D Mesh Lining
• Collar: Neoprene Race
• Cuff: Neoprene Race
• Zips: MAX Zips
• Thread: Bonded Nylon
• Ventilation: Panel in Panel Perforated Leather
• Reinforcement: Double Leather in Impact Areas

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Quick Release Hook & Loop Knee Sliders
• Elbow Slider: Removable Hook & Loop Elbow Sliders
• Rubberised Aramid Knee Gripper: Yes

FIT PROFILE

• Track

Cut slightly less aggressively than the V4.1, the Pro Series 1-pc suit is fully CE certified to level AAA and is an ideal choice for track days.

Made from super supple premium cowhide leather, the suit is reinforced with seam free, four-way woven stretch with motion panels which stretches from the side of the body to the arms and across the chest, knees, elbows, rear back, inner calf and thigh. This enhances the body length and offers superior levels of comfort and movement on and off the bike. Additionally, the double layer leather on the seat also features a stitched in coccyx protector and the inner section of the knee features Dupont™ Kevlar® to aid grip on the fuel tank under heavy braking.

Additionally, the fixed 3D Quick Dry mesh lining absorbs sweat easily, is fast drying and along with the panel in panel ventilation on the chest, body, inner thighs and back, keeps you fresh.

The race hump has been designed to accommodate helmet spoilers and aids aerodynamic performance in a racing tuck.

Add in-class leading safety features such as the suite of CE certified armour, TPU shoulder and knee cups, quick release hook & loop elbow and knee sliders and you have a high pedigree riding suit that punches way above its weight.

The Pro series Evo is an updated version of the Pro Series Suit as it now has In&Motion’s new essential airbag system and a removable lining.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Back Protector Level 1
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU
• Knee Cup: TPU

CONSTRUCTION

• Main Outer Material: Premium Drum Dyed Cowhide Leather
• Stretch Material: 4 Way Woven Stretch Panels with Full Body Motion Panels
• Inner Lining: Fixed Quick Dry 3D Mesh Lining
• Collar: Neoprene Race
• Cuff: Neoprene Race
• Zips: MAX Zips
• Thread: Bonded Nylon
• Ventilation: Panel in Panel Perforated Leather
• Reinforcement: Double Leather in Impact Areas

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Quick Release Hook & Loop Knee Sliders
• Elbow Slider: Removable Hook & Loop Elbow Sliders
• Rubberised Aramid Knee Gripper: Yes

FIT PROFILE

• Track

The Pirelli Diablo Supercorsa SP V3 tyres are the third generation in a long line of performance oriented Supercorsa tyres. As the factory tyres for the Ducati Panigale V4, the Diablo Supercorsa SP V3 tyres set the bar for replica racing and are ideal for trackday use or fast road riding.

New features developed from Pirelli's experience as the tyre supplier for the FIM World Superbike Championship set the Diablo Supercorsa SP V3 apart from the previous model. A multi-radius profile ensures uniform distribution of force over the contact patch. The new profile maximizes contact at extreme lean angles. New compounds take advantage of the new tyre profile resulting in a tyre that heats up quickly and grips well in various conditions. A re-designed "flash" tread pattern responds better to lateral forces compared to the previous tread pattern and improves stability when riding aggressively.

Riders looking for a high performance tire should look no further. The Pirelli Diablo Supercorsa SP V3 is the perfect match for your supersport or hyper naked.

Features:

• Angular “flash” tread pattern
• Larger steel cords and wider angle at the shoulders to provide grip at all leaning angles
• Hesitation-free entry into cornerss
• Only 4% tread void
• TL (tubeless)
• 200/60ZR17 80W  is OE Ducati Panigale V4

Retro Design, Security of the Future

The MT Jarama is the first retro helmet approved under the ECE 22.06 standard. And, of course, it already has the DOT homologation.

Retro Design, Security of the Future

The MT Jarama is the first retro helmet approved under the ECE 22.06 standard. And, of course, it already has the DOT homologation.

The wait is over!!

The latest helmet model KRE+ Carbon, from Spain. Manufactured to FIM standards, the same standards required in MotoGP and WSBK racing.

MT Helmets presents the new KRE+ Carbon made with a triple layer of carbon for excellent protection

The KRE+ helmet is the highest range of MT Helmets helmets. It has been designed for use in competition, specifically, this is the helmet model that Acosta will uses. It has been approved by the FIM for use on the circuit. Thanks to its triple layer of carbon, it obtain exceptional safety.

IMPORTANT: The KRE+ Carbon helmet models (all designs and graphics) have FIM homologation from size XS to size L. The rest of the sizes DO NOT have this homologation FIM homologation but ECE22.05 & DOT still approved for all NZ race use.

Features:

• FIM homologation of size XS-L (both included)
• ECE Homologation
• DOT Homologation
• Lastest MT Technology
• Aerodynamic design
• Triple layer of Carbon , which provides excellent safety for the pilot
• A different shell every two sizes with high impact absorption
• Screen with 360 anti-scratch and anti-fog field of vision with optimal closure
• Pinlock ready (included)
• Internal multi-density polystyrene
• Perfect lace padded foam interior
• Interior with a soft and pleasant touch, removable, washable, anti-allergy and fireproof, suitable for wearing with glasses
• Prepared for intercom installation (Not included)
• Emergency Shooters
• Air intakes and ventilation system
• Double D Closure
• Weight of size L +/- 1500 grams

The wait is over!!

The latest helmet model KRE+ Carbon, from Spain. Manufactured to FIM standards, the same standards required in MotoGP and WSBK racing.

MT Helmets presents the new KRE+ Carbon made with a triple layer of carbon for excellent protection

The KRE+ helmet is the highest range of MT Helmets helmets. It has been designed for use in competition, specifically, this is the helmet model that Acosta will uses. It has been approved by the FIM for use on the circuit. Thanks to its triple layer of carbon, it obtain exceptional safety.

IMPORTANT: The KRE+ Carbon helmet models (all designs and graphics) have FIM homologation from size XS to size L. The rest of the sizes DO NOT have this homologation FIM homologation but ECE22.05 & DOT still approved for all NZ race use.

Features:

• FIM homologation of size XS-L (both included)
• ECE Homologation
• DOT Homologation
• Lastest MT Technology
• Aerodynamic design
• Triple layer of Carbon , which provides excellent safety for the pilot
• A different shell every two sizes with high impact absorption
• Screen with 360 anti-scratch and anti-fog field of vision with optimal closure
• Pinlock ready (included)
• Internal multi-density polystyrene
• Perfect lace padded foam interior
• Interior with a soft and pleasant touch, removable, washable, anti-allergy and fireproof, suitable for wearing with glasses
• Prepared for intercom installation (Not included)
• Emergency Shooters
• Air intakes and ventilation system
• Double D Closure
• Weight of size L +/- 1500 grams

The wait is over!!

The latest helmet model KRE+ Carbon, from Spain. Manufactured to FIM standards, the same standards required in MotoGP and WSBK racing.

MT Helmets presents the new KRE+ Carbon made with a triple layer of carbon for excellent protection

The KRE+ helmet is the highest range of MT Helmets helmets. It has been designed for use in competition, specifically, this is the helmet model that Acosta will uses. It has been approved by the FIM for use on the circuit. Thanks to its triple layer of carbon, it obtain exceptional safety.

IMPORTANT: The KRE+ Carbon helmet models (all designs and graphics) have FIM homologation from size XS to size L. The rest of the sizes DO NOT have this homologation FIM homologation but ECE22.05 & DOT still approved for all NZ race use.

Features:

• FIM homologation of size XS-L (both included)
• ECE Homologation
• DOT Homologation
• Lastest MT Technology
• Aerodynamic design
• Triple layer of Carbon , which provides excellent safety for the pilot
• A different shell every two sizes with high impact absorption
• Screen with 360 anti-scratch and anti-fog field of vision with optimal closure
• Pinlock ready (included)
• Internal multi-density polystyrene
• Perfect lace padded foam interior
• Interior with a soft and pleasant touch, removable, washable, anti-allergy and fireproof, suitable for wearing with glasses
• Prepared for intercom installation (Not included)
• Emergency Shooters
• Air intakes and ventilation system
• Double D Closure
• Weight of size L +/- 1500 grams

The wait is over!!

The latest helmet model KRE+ Carbon, from Spain. Manufactured to FIM standards, the same standards required in MotoGP and WSBK racing.

MT Helmets presents the new KRE+ Carbon made with a triple layer of carbon for excellent protection

The KRE+ helmet is the highest range of MT Helmets helmets. It has been designed for use in competition, specifically, this is the helmet model that Acosta will uses. It has been approved by the FIM for use on the circuit. Thanks to its triple layer of carbon, it obtain exceptional safety.

IMPORTANT: The KRE+ Carbon helmet models (all designs and graphics) have FIM homologation from size XS to size L. The rest of the sizes DO NOT have this homologation FIM homologation but ECE22.05 & DOT still approved for all NZ race use.

Features:

• FIM homologation of size XS-L (both included)
• ECE Homologation
• DOT Homologation
• Lastest MT Technology
• Aerodynamic design
• Triple layer of Carbon , which provides excellent safety for the pilot
• A different shell every two sizes with high impact absorption
• Screen with 360 anti-scratch and anti-fog field of vision with optimal closure
• Pinlock ready (included)
• Internal multi-density polystyrene
• Perfect lace padded foam interior
• Interior with a soft and pleasant touch, removable, washable, anti-allergy and fireproof, suitable for wearing with glasses
• Prepared for intercom installation (Not included)
• Emergency Shooters
• Air intakes and ventilation system
• Double D Closure
• Weight of size L +/- 1500 grams

*NEW*

THE LATEST GENERATION OF PIRELLI RACE REPLICA EQUIPMENT

The Pirelli Diablo Supercorsa SP V4 tyres are the fourth generation and latest in a long line of performance oriented Supercorsa tyres.

The Diablo Supercorsa SP V4 tyres set the bar for replica racing and are ideal for trackday use or fast road riding.

New features developed from Pirelli's experience as the tyre supplier for the FIM World Superbike Championship have further set the Diablo Supercorsa SP V4 apart from the previous model.

Riders looking for a high performance tyre should look no further. The Pirelli Diablo Supercorsa SP V4 is the perfect match for your supersport or hyper naked.

ON ROAD / ROAD AND RACE TRACK:

Features:

• Featuring the latest evolution of the patented FLASH™ tread pattern designed to enhance homogeneous thrust at any lean angle
• Dual compound front and rear layout applied on state-of-art profiles combine outstanding racetrack performance with ultimate riding pleasure on road
• Engineered to provide maximum performance both on road with road-specific tyre pressures and on the racetrack with racetrack-specific tyre pressures (recommended 2.3bar front & 2.1bar rear when tyres are warm)

Explore The Details

Compound:

• Racing SC3 shoulder compound on front and rear tyres Cap&Base layout for fronts, Dedicated Base for rears

  Sticky cornering grip and impressive thrust exiting the corner

Structure:

• State-of-art tyre structure and compounds work together to provide enhanced tyre conformability and contact feeling

  Optimal performance both on road and on the racetrack, with road-specific and racetrack-specific tyre pressures, respectively

Profile: 

•  Racing profiles directly derived from World SBK

  Outstanding riding ease and tyre reactivity

Tread Pattern:

• Latest evolution of the patented FLASH tread pattern with the centre slick portion

  Homogeneous thrust at any lean angle and performance consistency turn after turn

*NEW*

THE TREADED RACING TYRE

Pirelli fastest treaded tyre for the racetrack. Available in multiple compound options for professional racing and track days

• Racing soul that is approved for street use (DOT)
• Consistency turn after turn
• New compounds directly from the FIM World Superbike Championship for ultimate grip and lap time record setting
• Multiple compound options to target different riders: from Pro racers to Track Dayers

Explore The Details

Compound:

• New generation racing compounds developed during the World SBK

  Ultimate racetrack grip and performance

  The combination of new generation racing compounds, tread pattern, profiles and tyre structure result in a significant reduction of the lap time

Structure:

• Racing tyre structure directly derived from World SBK

  Massive thrust exiting the corner

Profile: 

• Racing profiles directly derived from World SBK

  Outstanding riding ease, line holding and high speed stability

Tread Pattern:

Latest evolution of the patented FLASH tread pattern with the centre slick portion

Homogeneous thrust at any lean angle and performance consistency turn after turn

Fronts

• SC1 - Soft
• SC2 - Medium
• SC3 - Hard

Rears

• SC0 - Soft
• SC1 - Medium
• SC2 - Hard
• SC3 - Super Hard

The mid height version of the original Axiom boot.

This may be our entry level touring boot, but it’s still packed with features to keep your feet protected

Made from a microfibre construction, the boot features a SinAqua waterproof membrane for dryness and breathability

Added to this are the integrated ankle and heel protection. The boot also features an integrated reinforced toe box and is CE Certified as standard.

ARMOUR

• CE Certification Rating: Yes
• Heel Protection: Reinforced Cockpit
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Microfibre
• Waterproof Lining: SinAqua Waterproof Membrane
• Closure: Zip Fastening with Hook & Loop
• Shift Pad: TPU
• Shank: Polycarbonate Anti Twist Midsole
• Insole: Anti-Bacterial Gel
• Outsole: RST Touring Pro Sole

FEATURES & BENEFITS

• Toe Box: Integrated & Reinforced
• Puller: Strap Design

The mid height version of the original Adventure-X boot. Equipped with a large twin buckle closure system, the Adventure-X Mid is easy to put on and take off, while remaining fastened in place with additional hook & loop fasteners. A breathable SinAqua Pro membrane keeps the foot dry and fresh whether riding in the rain or wading through mud.

ARMOUR

• CE Certification Rating: Level 2/2/2/2
• Heel Protection: Reinforced Cockpit
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Microfibre
• Secondary Material: Suede Microfibre
• Waterproof Lining: SinAqua Waterproof Membrane
• Closure: Twin Buckle with Hook & Loop
• Shift Pad: TPU
• Shank: Polycarbonate Anti Twist Midsole
• Insole: Anti-Bacterial Gel
• Outsole: RST Touring Pro Sole

FEATURES AND BENEFITS

• Toe Box: Integrated & Reinforced
• Puller: Strap Design

A new RST race suit specifically designed for female motorcyclists, the TracTech Evo 4 provides CE Level AAA protection.

CE certified shoulder, elbow and back armour provides impact resistance to create a versatile suit for different riding styles.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Back Protector Level 1
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1
• Knee Armour: CE Level 1
• Hip Armour: CE Level 1
• Shoulder Cup: TPU

CONSTRUCTION

• Main Outer Material: Premium Drum Dyed Cowhide Leather
• Secondary Outer Material: 4 Way Woven Stretch Panels with Full Body Motion panels
• Inner Lining: Fixed Mesh Lining
• Cuff: Neoprene Race
• Collar: Neoprene Race
• Zips: MAX Zips
• Thread: Bonded Nylon
• Ventilation: Panel in Panel Perforated Leather

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Quick Release Hook & Loop Knee Sliders

FIT PROFILE

• Sport

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

With a less aggressive cut than other RST race suits, the TracTech Evo 4 provides the same perforated cowhide leather and CE Level AAA protection as the Evo R, in a package that is more comfortable to walk around in. CE certified shoulder, elbow and back armour provides impact resistance to create a versatile suit for different riding styles.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Level 1
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU

CONSTRUCTION

• Main Outer Material: Cowhide Leather
• Stretch Material: 4 Way Stretch with Leather Motion Panels
• Inner Lining: Removable Comfort Mesh Lining
• Collar: Leather Race
• Cuff: Rolled Leather
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Standard Knee Sliders - Matte

With a less aggressive cut than other RST race suits, the TracTech Evo 4 provides the same perforated cowhide leather and CE Level AAA protection as the Evo R, in a package that is more comfortable to walk around in. CE certified shoulder, elbow and back armour provides impact resistance to create a versatile suit for different riding styles.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Level 1
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU

CONSTRUCTION

• Main Outer Material: Cowhide Leather
• Stretch Material: 4 Way Stretch with Leather Motion Panels
• Inner Lining: Removable Comfort Mesh Lining
• Collar: Leather Race
• Cuff: Rolled Leather
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Standard Knee Sliders - Matte

The new V4.1 suit is the elite level race suit from RST, developed for the world’s most extreme racing environments.

Constructed with a 60/40 spilt of the highest quality Kangaroo and Grade A Cowhide, reinforced with Aramid protection and fitted with a full suite of level 2 CE armour, the V4.1 exceeds the highest AAA CE rating. Reverse hook & loop factory knee sliders, elbow sliders and inner knee grippers further enhance the V4.1’s real racing pedigree.

ARMOUR

• CE Certification Rating: AAA
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU
• Knee Cup: TPU

CONSTRUCTION

• Main Outer Material: Drum Dyed Kangaroo Leather
• Stretch Material: Keprotech with Leather Motion Panels
• Inner Lining: Removable Comfort Mesh Lining
• Collar: Neoprene Race
• Cuff: Neoprene Race
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Perforated Leather
• Reinforcement: Aramid in Impact Areas

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Race Dept Reverse Velcro Knee Sliders
• Elbow Slider: Standard Elbow Slider
• Superfabric Reinforcement: Yes
• Boot Gripper Tape: Yes

With a less aggressive cut than other RST race suits, the TracTech Evo 4 provides the same perforated cowhide leather and CE Level AAA protection as the Evo R, in a package that is more comfortable to walk around in. CE certified shoulder, elbow and back armour provides impact resistance to create a versatile suit for different riding styles.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Level 1
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU